10" x 54" ORANGE Vinyl Decal Sun Strip Windshield Shade Eyebrow Banner

Description

This easy to install solid color vinyl strip is perfect for replacing that fading sun strip on your car. Or add it to the windshield to give it a totally different look!
The strip comes in the size of 8" x 54"
so please make sure it will fit your windshield! If it is too small, let me know and I can get a bigger size for you!
I have several colors to choose from!
The one shown in the pictures is a MATTE BLACK.
(A MATTE BLACK ONE WILL BE SHIPPED OUT UNLESS ANOTHER COLOR IS NOTED AT CHECKOUT! THANKS!!)
But I also have (All these colors are semi gloss looking)
-White
-Orange
-Red
-Yellow
-Blue
-Ice Blue
-Mint
-Lime Green
-Dark Green
-Black
-Pink
-Silver
-Gold
IF YOU WOULD LIKE A SPECIAL COLOR, PLEASE CONTACT ME!
I am able to get additional colors in stock, with only a delay or so in shipping time!
These decals are very easy to install.
You'll only need a few tools!
-A razor knife (A box knife will work, but something with a fine point on it, will make the job a lot easier)
-A spray bottle with a few drops of dish soap added to it
-Squeegee (Or use a credit card)
-Glass cleaner
-Paper towels
-Ruler (To make sure the strip is even on both sides
Step 1: Get your surface as clean as possible. And little bits of dirt, or lint left will most likely leave a bubble in the vinyl if they are big enough
Step 2: Wet the surface thoroughly with the water/soap mixture.
Step 3: Peel backing off of vinyl strip, and thoroughly wet the back side of it (The side with the adhesive)
Step 4: Making sure both surfaces are wet, place the strip in the general position you want it. Don't apply too much downforce pressure here, or the adhesive may begin to bond to the windshield.
Step 5: The purpose of the water is to make the vinyl easy to move. So, using your ruler, make sure the sun strip is centered, and even on both sides.
Step 6: Squeegee down to the surface working from the middle outwards. Be careful around the edges.
Step 7: Carefully use the squeegee to push all the water out, and create a edge where the vinyl folds upwards around the seal on the outside of the windshield.
Step 8: Use your razor knife to trim off the excess vinyl. Make sure to not scratch the glass, or cut into the windshield seal.
Step 9: Clean up, and enjoy!
This can easily be done in 10 minutes. Please wait 2 days before washing your car. And avoid using windshield wipers at this time as well to avoid lifting.
After that time period, this vinyl is near bulletproof. I've never had a single complaint about it lifting, peeling, chipping, etc.
Thanks for looking and have a great day!!